Self Ventilated Filter

AmerAir International is a leader in supplying complete odor control systems in the Middle East providing proven chemical scrubbing, biological filtration and carbon adsorption technologies to our customers.

We represent major top suppliers for the pumps, fans and other peripheral equipments utilized in our system designs.

In a self ventilated carbon filter, odorous air from sources such as a sewage wet well, is ventilated to the odor control unit by a fan located on top of the filter. Polluted air is passed through a carbon bed to remove the pollutants and odorous components. Clean air is discharged through the fan outlet.

Odor removal efficiency in this system is up to 99.5%!

This system is shipped ready to install.  Request a quote today!

Odorous compounds (H₂S, Mercaptains, and other VOC’s) are adsorbed into the carbon surface. Virgin, activated, catalytic, chemically impregnated (Model SCCF) or water washable (Model SWCF) carbon is used depending on the application or customer specification.

Appropriate gas retention time is slelected based on the size and type of the carbon as well as the application. The treated volume and efficeincy as well as life of the carbon are all important factors considered in the design. The quality of the carbon selected is also very crusial.

Each type of carbon has its advantages and disadvantages and the optimum selection is based on customer specification and requirements. For example, the carefully controlled addition of the chemical reagent ensures the efficient removal and retention of the pollutants while retaining an excellent physical adsorption capacity. While, the catalytic water washable carbon removes the H₂S and catalyzes it to water soluble sulfur compounds that could be washed away when the carbon is washed with water only!

However, the regeneration is only possible for H₂S and other gases will not be washed away from the carbon and therefore limit the carbon adsorption capacity during each regeneration. AAI only utilizes the highest quality carbons as manufactured by Jacobi Carbon.

AddSorb® VA3 is a high activity extruded activated carbon manufactured by steam activation from select grades of coal. AddSorb® VA3 is chemically impregnated specifically for use in the control of hydrogen sulfide, methyl mercaptans and organic odors in the vapor phase.

AddSorb® Sulfox is a vapor phase virgin pelletized activated carbon that has been specially developed for the adsorption of hydrogen sulfide and methyl mercaptans. It is extremely well suited for use in sewage treatment plants and pumping stations where these compounds are typically found. The base material for Sulfox is bituminous coal. Sulfox is produced in a specialized process that creates an exceptionally high hydrogen sulfide capacity.

This capacity is created without the use of chemical impregnate. Sulfox is ideally suited for the removal of Hydrogen Sulphide from gas streams containing an equivalent level of oxygen and water vapor.

Excess water vapor will result in the condensation of water in the pore structure of the activated carbon thereby reducing the activated carbon’s Hydrogen Sulfide capacity.

The water washable saturated carbon can be regenerated in-situ by water. This carbon can be regenerated up to 10 times based on the use.  Carbon life is a function of the type and concentration of contaminants in the air stream.